Nason Ful-Poxy 491-12 Primer is a non-sanding epoxy primer especially formulated for maximum adhesion and corrosion resistance to properly treated surfaces. 491-12 may be used over steel, aluminum, fiberglass and sanded finish coats. It can be topcoated with all refinishing systems.Product Specifications: Formulated with cutting-edge urethane technology, this primer is suitable for bare fiberglass, steel, aluminum, and thoroughly sanded painted surfaces. …Glidden Gripper primer is used on surfaces that paint does not easily adhere hard to, such as tile, wallpaper,wood, paneling and laminates. It can also be used on normal surfaces l...Have a friend or loved one who’s just getting into makeup — or already can’t get enough of it? A gorgeous new eyeshadow palette is sure to set any cosmetic lover’s heart aflutter. ...Nason®XL 431-22 is a 4.8 lb/gal (575 g/l) VOC compliant, 2K urethane, direct-to-metal primer-filler designed to provide high build, and an exceptionally free-sanding film without shrinkage or sand scratch swelling.A one-component, fast drying, corrosion resistant, lead and chromate free primers formulated for use on machinery & equipment. 491-22™ can be used under any single-stage topcoat or used as a “shopcoat” or “onecoat” system to inhibit corrosion during transport and construction.Most water-based versions of KILZ-brand primers may be thinned by adding a small amount of water, including KILZ Latex Primer, KILZ Premium Primer and KILZ Max Primer. However, KIL...The Nason 491-10 epoxy primer needs 60 min. before a 2nd coat and has up to 48 hours for a topcoat without sanding. I assume "topcoat" in that case means the urethane 2K primer also? The Nason 421-10 urethane primer will then go over that and needs to flash 8-10 min. between coats and max. flash of 2 hours without sanding.Axalta VS3000 is a 5.4 lb/gal (647 g/l) VOC compliant, non-sanding, chrome free etch primer that provides exceptional adhesion and corrosion resistance over bare metal. It is designed to eliminate the need to chemically pretreat metal surfaces before priming. Features. Chrome free; Exceptional adhesion; Exceptional corrosion resistance; Product ...Axalta Nason 2K Urethane Sealer 422-50 Gallon. Item#: NAS 422-50 01. Nason 422-50 is a 2K urethane, non-sanding sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. The 422-50 sealer is gray and can be applied directly over a variety of substrates, including sanded OEM replacement panels.Nason® SelectPrime™ 421-19 (gray) is a 2K Urethane Primer-Filler designed to provide high build combined with an exceptionally free sanding film without shrinkage or sand scratch. Nason® SelectPrime™ 421-19™ is designed to …Nason® SelectPrime™ 421-17™ (Buff) is a 2K Urethane Primer-Filler designed to provide high build combined with an exceptionally free sanding film without shrinkage or sand scratch. Nason® SelectPrime™ 421-17™ is designed to maximize DOI (Distinctness of Image).Detailed Description. Activator; Nason Finishes is adding a low-temperature fast activator to its National Rule clearcoat offering. Axalta Introduces Nason Finishes 483-76 SELECTCLEAR 2K. Designed to be used in low temperatures where a faster dry time is required to maintain productivity. Works with 496-00, 497-00 and 498-00 National Rule ...A gray, 2K urethane primer-filler for fiberglass, steel and aluminum substrates. It maximizes DOI, provides high build and a free sanding film without shrinkage or sand …Etch primer may be used under any Nason® primer-surfacer or sealer to improve corrosion performance. SelectPrime™ 491-55™ Chrome-Free Etch Primer must be followed with a primer-surfacer or Sealer prior to topcoating. SURFACE PREPARATION Before sanding, wash with soap and water and remove wax and grease with locally …You can cover your filler with the epoxy primer if you want. The 2k primer is for leveling more than anything. After you have done your final ...Detailed Description. Activator; Nason Finishes is adding a low-temperature fast activator to its National Rule clearcoat offering. Axalta Introduces Nason Finishes 483-76 SELECTCLEAR 2K. Designed to be used in low temperatures where a faster dry time is required to maintain productivity. Works with 496-00, 497-00 and 498-00 National Rule ...When it comes to painting challenging surfaces, a good quality primer can make all the difference. Difficult surface primers are specially formulated to adhere to surfaces that are...Treat bare metal areas with SelectPrime™ 491-17™ 2K Etch Primer, Ful-Poxy® 491-16™ DTM Epoxy Primer/Sealer, Ful-Poxy® 491-35™ HS Epoxy Primer/Sealer or other Nason® etch primer or epoxy primer. TOPCOATS All Nason® Topcoats. However, primer must be sanded and sealed with a Nason® sealer prior to topcoating. SURFACE PREPARATIONProduct catalogs for Cromax, Standox, Spies Hecker, Nason, Axalta Commercial Coatings, and Axalta Industrial Coatings. Paint and coatings for cars, trucks, buses, trains, equipment and custom cars. ... Properly prepared primer/primer surfacers Fully cured painted finishes: VOC: Please refer to VOC Compliance Charts: Available Sizes. Size Case ...Product catalogs for Cromax, Standox, Spies Hecker, Nason, Axalta Commercial Coatings, and Axalta Industrial Coatings. Paint and coatings for cars, trucks, buses, trains, equipment and custom cars. Nason® Ful-Poxy® 491-10™ DTM Epoxy Primer/SealerPaint Primer Sealer; White; 1 Quart; NasonXL 431-80 Urethane Sealer is a white two-component non-sanding urethane sealer that applies smoothly and maintains superior color and gloss retention for high quality finishes. These Urethane Sealers are designed to increase intercoat adhesion while providing a uniform ground coat over repairs. All OEM finishes, properly prepared primer or primer-surfacer, and fully cured previously painted finishes. SURFACE PREPARATION Before sanding, wash with soap and water and remove wax and grease with Nason® 441-05™ Silicone and Wax Remover or 481-75™ Surface Cleaner (use locally permitted cleaner in regulated areas) using clean rags. Nason Ful-Poxy 491-12 is a non-sanding epoxy primer for maximum adhesion and corrosion resistance. It can be used over steel, aluminum, fiberglass and sanded finish …An acrylic primer-surfacer designed to repair OEM or properly cured and prepared automotive finishes. It is fast drying, easy to use and features excellent filling properties … Nason ® Finishes Basecoat & Topcoats For over 50 years, Nason® Finishes has stood the test of time as a proven product trusted by many industry experts. Developed with next generation technology, NEW Nason Finishes products feature a simple, easy-to-use overall refinishing system to deliver improved product performance at an affordable price. Axalta Nason SelectPrime 421-10 2K DTM Urethane Primer Gray Gallon. Item#: NAS 421-10 01. A 2K urethane, direct to metal primer-filler designed to provide high build and an exceptionally free sanding film without shrinkage or sand scratch swelling.Nason® Ful-Poxy® 491-16™ DTM Epoxy Primer/Sealer. A non-sanding, epoxy primer formulated for maximum adhesion and corrosion resistance. Features. Non-sanding;Step 6: Let the Paint Dry. Let the base coat dry for at least 15 minutes before applying a Nason clear coat. Depending on the clear coat product, allow 8 to 12 minutes to dry, then apply a second clear coat. Nason automotive paint products, intended for professional painters, provide a fresh, clean finish when rejuvenating damaged …Item#: NAS 421-23 01. Nason ® SelectPrime™ 421-23™ is a fast-drying, easy-to-use Acrylic Primer-Surfacer (GRAY). Nason® SelectPrime™ 421-23™ is designed to use under synthetic enamel*, acrylic enamel, acrylic lacquer, and urethane enamel. May be used to repair OEM or other properly cured and prepared automotive finishes.Properly prepared primer-surfacers Fully cured painted finishes: VOC: Please refer to VOC Compliance Charts: Available Sizes. Size Case Qty UPC GMC; Quart: 6: 012500053882: 1250005388: ... Nason® Ful-Fil® 421-08™ 1K Acrylic Primer. Fast drying Good filling properties Good topcoat holdout. Nason® SelectPrime™ 421-23™ 1K Acrylic Primer ... Nason® 421-25™ Primer. Nason® 421-25™ Primer. A red oxide aerosol primer that is easy to apply and adheres well to bare metal for good corrosion resistance ... You talk with them all the time, but now that you're aware they live with mental illness, you may be at a loss for what to say or do. Get a personal primer on the do's and don'ts, ... Chrome Free Etch Primer; Nason (R) 491-55 (TM) Chrome Free Etch Primer is a non-sanding primer designed to provide exceptional adhesion and corrosion resistance over bare metal at less than 5.5 VOC ready to spray. This product eliminates the need to chemically pretreat metal surfaces before priming. Axalta Nason SelectPrime 2K Urethane Primer 1 gal Gray Part 421-19-01. $138.20. This item cannot be shipped. Free pickup in 1-2 days or ... Part 421-19-01. 1 gal Paint Primer. A gray, 2K urethane primer-filler designed to maximize DOI while providing high build and an exceptional free sanding film without shrinkage or sand scratch swelling ...Description. A 2K urethane, direct to metal primer-filler designed to provide high build and an exceptionally free sanding film without shrinkage or sand scratch swelling. When modified as a sealer, it is easily applied, offers good holdout and lays down smooth for excellent topcoat appearance.A gray, 2K urethane primer-filler designed to maximize DOI while providing high build and an exceptional free sanding film. Learn about its features, packaging, VOC compliance, mixing instructions, application instructions and more.Mar-Hyde Ultimate 2K 1 Gallon Vanilla Urethane Primer Surfacer - 5553. Part #: 5553. Line: MRH. 5.0. (1) 1 Year Limited Warranty. Application Type: Spray-On. Nason ® Finishes Basecoat & Topcoats For over 50 years, Nason® Finishes has stood the test of time as a proven product trusted by many industry experts. Developed with next generation technology, NEW Nason Finishes products feature a simple, easy-to-use overall refinishing system to deliver improved product performance at an affordable price. Nason 491-40 Gray Etch Primer adheres well to bare metal providing good corrosion resistance. Packaged in aerosol cans, 491-40 is a great time saver for small touch-ups over steel, galvanized steel and aluminum. All OEM finishes, properly prepared primer or primer-surfacer, and fully cured previously painted finishes. SURFACE PREPARATION Before sanding, wash with soap and water and remove wax and grease with Nason® 441-05™ Silicone and Wax Remover or 481-75™ Surface Cleaner (use locally permitted cleaner in regulated areas) using clean rags.Prior to sanding, remove all wax, grease, oil, and road tar with Nason® 441-05™ Wax and Grease Remover or Nason® 481-75™ Surface Cleaner. In regulated areas use locally permitted cleaners. Sand old finish. For direct to steel application as non-sanding primer, sand with 80 grit followed by 180 grit.Nason 421-17 SelectPrime 2K Urethane Primer, Beige, 1 Gallon. A gray, 2K urethane primer-filler designed to maximize DOI while providing high build and an exceptional free sanding film without shrinkage or sand scratch swelling; Buff in color; Maximizes DOI; High build; Application Apply 2-4 medium-wet coats until desired film build is achievedDESCRIPTION. An aerosol primer that is easy to apply and adheres well to bare metal for good corrosion resistance. COLORS. 421-24TM Primer - Gray 421-25TM Primer - Red …Nason offers a range of finishes for cars, trucks and trailers, but no primer. Browse Nason undercoats, topcoats, clears, tints and toners at O'Reilly Auto Parts.Hazardous Material: Yes. $213.87 each. Hurry up! Current stock: Quantity: Add to Cart. Buy it now. Product Description. A 2.1 lb/gal (250 g/l) VOC compliant, non-sanding, epoxy primer-sealer that is formulated for maximum adhesion and corrosion resistance.Your primer for the debt collections netherworld. By clicking "TRY IT", I agree to receive newsletters and promotions from Money and its partners. I agree to Money's Terms of Use a...Nason® SelectPrime™ 421-17™ (Buff) is a 2K Urethane Primer-Filler designed to provide high build combined with an exceptionally free sanding film without shrinkage or sand scratch. Nason® SelectPrime™ 421-17™ is designed to maximize DOI (Distinctness of Image).Product catalogs for Cromax, Standox, Spies Hecker, Nason, Axalta Commercial Coatings, and Axalta Industrial Coatings. Paint and coatings for cars, trucks, buses, trains, equipment and custom cars. Nason® Ful-Poxy® 491-12™ DTM Epoxy Primer/Sealer (Charcoal)item 5 NASON Select-Primer Gallon Kit 2K 421-19 Mid-Temp Activator 483-87 Gray NASON Select-Primer Gallon Kit 2K 421-19 Mid-Temp Activator 483-87 Gray. $180.00. Free shipping. See all 5 - listings for this product. Ratings and Reviews. Learn more. Write a review. 4.9. 4.9 out of 5 stars based on 16 product ratings.Nason Plastic Primer - Buy Oil Based Primer at best price of Rs 330/litre by Avon Paint Store. Also find product list from verified suppliers with contact ... Before sanding, wash with soap and water and remove wax and grease with Nason® 441-05™ Silicone and Wax Remover or 481-75™ Surface Cleaner (use locally permitted cleaner in regulated areas) using clean rags. Sand finishes according to primer or substrate recommendations and chemically treats large bare metal areas. TOPCOATS All Nason ... From ancient monuments to pagan rituals and traditions around the world, here's a primer for the beginning of fall. Ready your pumpkin spice lattes, mooncakes, and passport—the Fal...Nason® 421-25™ Primer. A red oxide aerosol primer that is easy to apply and adheres well to bare metal for good corrosion resistance. Nason ® Finishes Basecoat & Topcoats For over 50 years, Nason® Finishes has stood the test of time as a proven product trusted by many industry experts. Developed with next generation technology, NEW Nason Finishes products feature a simple, easy-to-use overall refinishing system to deliver improved product performance at an affordable price. Nason N-1000 Cleaner is a solvent-based degreaser part of the Nason repair system. It is designed to remove surface contaminants before application of the Nason Primer, Filler or Basecoat. Nason N-1000 will help to improve the final appearance of the finish and is suitable for use on a variety of substrates. It is available in five-litre cans.Product catalogs for Cromax, Standox, Spies Hecker, Nason, Axalta Commercial Coatings, and Axalta Industrial Coatings. Paint and coatings for cars, trucks, buses, trains, equipment and custom cars. Nason® 491-40™ Self-Etch PrimerPPG Refinish Commercial Performance Coatings 1 Gallon Black Epoxy Primer - EPX908-1. Part #: EPX908-1. Line: PPG. 0.0. (0) 1 Year Limited Warranty. Color: Black.Nason 421-17 SelectPrime 2K Urethane Primer, Beige, 1 Gallon: Item # 421-17-USG: Price available to members only . On Hand: 5 Sold As: EACH . DealerShop Members, Login to Purchase . More Products from Axalta Coating Systems Add to Shopping List Save For Later . Overview . Nason 421-17 SelectPrime 2K Urethane Primer, Beige, 1 Gallon ...Nason® Ful-Poxy® 491-16™ DTM Epoxy Primer/Sealer. Nason® Ful-Poxy® 491-16™ DTM Epoxy Primer/Sealer. A non-sanding, epoxy primer formulated for maximum adhesion and corrosion resistance. Features. Non-sanding; Maximum adhesion; Maximum corrosion resistance; MSDS TDS. Product Details. Type: Primer:12877 posts · Joined 2003. #2 · Mar 17, 2010. Some people apply urethane primer directly to bare metal and have no problems. Other people including me believe in epoxy primer on bare metal then urethane primer for leveling. Keep in mind the local shops are all about getting a car in and out as quick as possible.Why Nason is the right choice: Reliable basecoat & 2K topcoat quality, made in Europe. Smooth colour matching thanks to user-friendly and cost-effective colour tools, including spectrophotometer. Easy mixing ratios & application. Price competitive while being a proven money maker. Compact and solid range of ancilliary products.Brand Information. Fast and easy to apply, Nason (R) Finishes take you from start to beautiful finish with speed and efficiency at a low cost. The system was designed to work together to give you the best results when time and money are limited. Nason (R) undercoats, topcoats and clears deliver Value in a Hurry (TM).Axalta Etch Primer Activator 421 MIX RATIO Component Volume 420 1 421 1 APPLICATION VISCOSITY 15 - 16 seconds at 68°F/20°C, DIN 4 POT LIFE Approximately 8 hours at 68°F/20°C. SPECIAL TIPS 1. 0.3 mil dry film thickness is necessary for adequate corrosion resistance. 2. All traces of rust must be removed before applying Axalta Etch …Curious about cognitive behavioral therapy? Here's a primer on how CBT is used to treat bipolar disorder. CBT for bipolar disorder can help you change the distorted thinking patter... 491-21™ Oxide Machinery & Equipment Primer 491-22™ Gray Machinery & Equipment Primer MIX RATIO Ready to spray. Primer can be reduced with Ful-Base® 441-20™, 441-21™ or 441-22™ Reducers. Any thinning will eliminate compliance with VOC limitation of 3.5 lbs/gal. VISCOSITY 65-85 KU POTLIFE Indefinite APPLICATION And yes, the etch primer is one of the "suitable substrates" for your Urethane primer. Properly treated bare fiberglass, steel and aluminum as well as thoroughly sanded, painted surfaces. Treat bare metal areas with Nason® 491-17TM Etch Primer. 491-16TM Ful-PoxyTM Epoxy Primer or other Nason® Etch Primer or Epoxy Primer. This is an …Ful-Poxy® 491-16™ Primer is a non-sanding epoxy primer especially formulated for maximum adhesion and corrosion resistance to properly treated surfaces. 491-16™ may be used over steel, aluminum, fiberglass and sanded finish coats. It can be topcoated with all refinishing systems. Ful-Poxy® 491-16™ is a two-component product and must be ... Nason Ful-Poxy 491-12 Primer is a non-sanding epoxy primer especially formulated for maximum adhesion and corrosion resistance to properly treated surfaces. 491-12 may be used over steel, aluminum, fiberglass and sanded finish coats. It can be topcoated with all refinishing systems. 421-08™ Acrylic Primer-Surfacer (Gray) 421-08™ Primario para Superficies (Gris) 421-09™ Acrylic Primer-Surfacer (Red) 421-09™ Primario para Superficies (Rojo) Nason® SelectPrime™ Primers are easy to apply and quick to dry, so you’re always well-equipped to handle cost-limited repairs with quick turnaround schedules.Nason ® SelectPrime™ 421-23™ is a fast-drying, easy-to-use Acrylic Primer-Surfacer (GRAY). A 4.8 lb/gal (580 g/l) VOC compliant acrylic primer-surfacer designed to be used under all Nason® topcoats. It is fast drying, easy to sand and has good filling and topcoat holdout properties. A 4.8 lb/gal (580 g/l) VOC compliant acrylic primer ... A non-sanding, etch primer that provides exceptional adhesion and corrosion resistance over bare metal. It eliminates the need to chemically pretreat metal surfaces before priming. This product has been discontinued. The replacement product is Axalta VS3000 Etch Primer. Features. Non-sanding; Exceptional adhesion; Exceptional corrosion resistance Find the right Nason 1 Gallon 1 Gallon Epoxy Primer for your vehicle at O'Reilly Auto Parts. Place your order online and pick it up at your local store for freeProduct catalogs for Cromax, Standox, Spies Hecker, Nason, Axalta Commercial Coatings, and Axalta Industrial Coatings. Paint and coatings for cars, trucks, buses, trains, equipment and custom cars. Nason® 491-55™ Etch PrimerProduct catalogs for Cromax, Standox, Spies Hecker, Nason, Axalta Commercial Coatings, and Axalta Industrial Coatings. Paint and coatings for cars, trucks, buses, trains, equipment and custom cars. Nason® Ful-Poxy® 491-12™ DTM Epoxy Primer/Sealer (Charcoal) COMPONENTS. Mix 4 parts NasonXL 431-22 DTM Grey Primer to 1 part NasonXL 445-10 Super Fast Activator, 445-11 Fast Activator, or 445-12 Standard Activator. Spray viscosity 11-13 seconds in Zahn #3 @ 77°F (25°C). The doors and cowl which I had done at a shop, have been primed with DuPont "Nason" primer (# 421-20). In an effort to keep it all the same, I was just going to go buy some of that and the matching activator. Well, after doing some research, I've found that Nason is DuPont's economy line. I'd rather not put junk primer under what I hope to be a ...2K Urethane Primer (Gray) 1250038431; 1250038432 (CHEMTREC) - 800-424-9300 SAFETY DATA SHEET Product identifier Other means of identification Emergency telephone number Section 1. Identification::: Supplier's details :Axalta Coating Systems, LLC 50 Applied Bank Blvd. Suite 300 Glen Mills, PA 19342 USADetailed Description. Activator; Nason Finishes is adding a low-temperature fast activator to its National Rule clearcoat offering. Axalta Introduces Nason Finishes 483-76 SELECTCLEAR 2K. Designed to be used in low temperatures where a faster dry time is required to maintain productivity. Works with 496-00, 497-00 and 498-00 National Rule ...